Bam Bam Samples 0.89% Cu And 0.638 G/T Au at Majuba Copper Project

    0
    64

    Bam Bam Resources Corp. reports that it has received results for 58 road cut-rock chip samples collected from the new drill road construction at the Majuba Hill Project in Pershing County Nevada. The results are very encouraging with six samples returning greater than 2000 ppm (0.2%) copper. All these samples occur within the western group of samples. Five samples along this road returned good gold assays with a high of 0.638 g/t Au.

    The results are encouraging because they are consistent with the copper leaching/enrichment model that the Company is using to guide the drilling. Reverse circulation drilling is in-progress to expand and in-fill the Known-Copper Oxide mineralization. The rock chip zone is a 213 meter (700 ft) step-out from any previously drilling in the Known-Copper Oxide Target Area. All previous drilling was directed northward.

    David Greenway, President and CEO, commented: “The significant step-out that these high-grade oxide copper samples show is very encouraging. I am particularly encouraged that we are starting to see better gold assays from the surface rock chip sampling.”

    Sample*Cu (ppm)Ag (g/t)Au (g/t)Zn (ppm)Pb (ppm)Sn (ppm)Mo (ppm)
    MHR-10078,89019.70.006323131003
    MHR-4415,98080.00533791205
    MHR-10124,0307<0.005229111205
    MHR-10133,7905.20.01360111404
    MHR-4423,01010.20.023311121404
    MHR-10142,8803<0.0054136703
    MHR-10466312.50.00591426902
    MHR-10155691.8<0.005776141506
    MHR-10275323.10.6383866313022
    MHR-10085152.60.0111202114051
    MHR-10434832.70.01456715904
    MHR-10164592.3<0.005849101006
    MHR-4364212.80.4562815013012
    MHR-10474033.40.005768131102
    MHR-4393910.50.0081,280413028
    MHR-10263661.80.21141565809
    MHR-10402570.90.00562614608
    MHR-10322221.50.038683813019
    MHR-10102091.60.01261910013
    MHR-10182071.1<0.00528711503
    MHR-10442021.90.00866861003
    MHR-4401964.20.0072,1904820100
    MHR-10201771.40.008258191407
    MHR-10171763.5<0.0051987703
    MHR-1033173<0.5<0.0051,110232010
    MHR-105817110.006706907
    MHR-10221690.7<0.0051,18525701
    MHR-10191660.9<0.00535917303
    MHR-10451651.20.0068133801
    MHR-10111613.40.00816971507
    MHR-10361571.50.0071,380192029
    MHR-4381531.80.29219238807
    MHR-10211511.3<0.005248171307
    MHR-4371501.30.09948754705
    MHR-10241461.20.0226939404
    MHR-10501370.60.00597212011
    MHR-10521330.7<0.00514111006
    MHR-10561100.70.0077211207
    MHR-10571101.1<0.0057461208
    MHR-10291071.40.19224242706
    MHR-10481051.30.0052931206
    MHR-10341000.60.0061,155242014
    MHR-1053950.8<0.00512821106
    MHR-1051920.9<0.00511211106
    MHR-1023871.10.00925323704
    MHR-1028870.90.01733233604
    MHR-1042861.60.017196167015
    MHR-10548610.00819831305
    MHR-1049821.10.0057331206
    MHR-1055822.60.0153211016
    MHR-1031690.60.04336123305
    MHR-1030671.10.01330233404
    MHR-10255510.03413819503
    MHR-1035550.50.0062,40015207
    MHR-1039520.80.0051,2809407
    MHR-1037400.60.012780324013
    MHR-1041200.50.0091688605
    MHR-1038180.50.0061,165114012
    *Results are ordered from high to low Cu values. Samples were collected as chip/channel samples on 5 to 10 foot intervals. Sample density is not sufficient to determine true width of mineralization.

    Quality Assurance/Quality Control (“QA/QC”) Measures, Chain of Custody

    The Company has implemented a QA/QC program using best industry practices at the Majuba Hill Project. The samples are transported from the BBR secure warehouse or directly from the project to the ALS Sample Prep Facility in Reno or Elko, Nevada. ALS then transports the prepared pulps to their analytical lab in Reno, Nevada or Vancouver, B.C. Soil and rock chip samples are transported by the company directly to Elko or Reno, Nevada.

    Drill core samples are sawn in half lengthwise and one half is placed in labeled cloth sample bags. All samples are analyzed for copper, gold, silver, and 33 other elements. Gold is determined by ALS method Au-AA23 which is a fire assay with an AAS finish on a 30 gram split. Copper, silver and the remaining 31 elements are determined by ALS method ME-ICP61 which is a four acid digestion and ICP-AES assay. Approximately 5% of the submitted samples are drill duplicates and copper-gold-porphyry commercial standard reference material pulps. The sample rejects and remaining pulps will be retrieved from ALS.

    About Bam Bam Resources Corp.

    Bam Bam Resources Corp. (CSE: BBR / OTC: NPEZF / FSE: 4NPB) is engaged in the identification, review and acquisition of latter stage copper and copper/silver/gold assets. This is in direct response to the growing worldwide demand and lack of supply for precious metals fueled by the Green New Deal in the US and most other developed nations with similar programs aimed at addressing climate change. Such programs are heavily reliant on silver, gold and especially copper to produce Electric Vehicles and other renewable power sources, as well as building infrastructure to provide clean and affordable electricity.

    The flagship project is the Majuba Hill copper, silver and gold District located 156 miles outside Reno, Nevada, USA. Management has been mandated to focus on safe, mining friendly jurisdictions where government regulations are supportive of mining operations.

    For further information on Bam Bam Resources contact, Joel Warawa, VP of Corporate Communications at jw@bambamresources.com or 1 (855) 475-0745

    Disclaimer
    MiningIR host a variety of articles from a range of sources, our content, while interesting, should not be considered as formal financial advice. Always seek professional guidance and consult a range of sources before investing.